From the manufacturer Perfect wood look with Perfect Fix: guaranteed bubble-free. Also suitable for large areas. Wood look, but easy to clean. With the furniture films in wood look from the Perfect Fix range, you can give wardrobes, doors or the whole kitchen a completely new look in no time. Without much money and only with some time use your furniture gets a second Life. The Perfect Fix technology is currently unique: thanks to the micro-perforation, sticking the film becomes child’s play and above all: bubble-free. The adhesive films are durable, easy to apply, wipe clean and heat resistant. They are ideal for crafting and gluing furniture and surfaces of all kinds, such as Trays, jewellery boxes, glass, cartons. Quality you can rely on Of course, all Venilia films are phthalate-free. Thanks to the special thickness of 160µ, the film is easy to apply. Even if you need several attempts until the film is positioned correctly, the corners do not warp and the film retains its shape. Large and small surfaces are covered in no time and finger insert. High-quality self-adhesive furniture film in wood look. Perfect Fix micro-perforation guarantees bubble-free application. Wipe clean thanks to high water and heat resistance indoors. Exceptional thickness of 160µ. Phthalate-free. Ideal for transforming large areas such as kitchens, cupboards etc. Aids In order for the project to be successful, it is advisable to have the following tools at hand: Underlay For cutting a pair of scissors or Stanley knife/cutter: the blade of the scissors or the cutter should be sharp, so that the edges are particularly beautiful and accurate. Ruler. For smoothing a squeegee (also available from Venilia as an accessory set!) Preparation For a good result, it is helpful when surfaces are clean, dry and free from grease. Cleaning with simple rinse and water is usually sufficient. Dry well and you’re ready to go! Of course, rough surfaces can also be glued – plaster, cement and plywood should be applied beforehand with a varnish or coat. Next, measure the surface to be glued and cut the film to fit. For an area with cut-outs, a template can be created from newspaper or cardboard. This is placed on the back of the film and transferred as an exact shape and cut. There is a printed grid on the back of the adhesive sheet to help measure and cut. Application of the film. For best results, it is recommended to work at room temperature. Remove the protective film, carefully position the edge and smooth the film piece by piece. A squeegee is helpful to avoid air bubbles. The good thing is that the fixing time is approx. 20 minutes: this means that the film can still be re-applied within the first 20 minutes until the correct position is found. After that, it will last. Large surfaces: it is easier not to peel off the whole protective film. Cut by piece. If the first part of the adhesive film is bubble-free, peel off a piece more from the protective film and apply the adhesive film. Repeat until the whole film sticks nicely smooth.
About this item High-quality self-adhesive furniture film in wood look Perfect Fix micro-perforation guarantees bubble-free application No harmful plasticisers (phthalate-free) High water and heat resistance indoors Ideal for transforming large areas such as kitchens, cupboards etc From the manufacturer Perfect wood look with Perfect Fix: guaranteed bubble-free. Also suitable for large areas. Wood look, but easy to clean. With the furniture films in wood look from the Perfect Fix range, you can give wardrobes, doors or the whole kitchen a completely new look in no time. Without much money and only with some time use your furniture gets a second Life. The Perfect Fix technology is currently unique: thanks to the micro-perforation, sticking the film becomes child’s play and above all: bubble-free. The adhesive films are durable, easy to apply, wipe clean and heat resistant. They are ideal for crafting and gluing furniture and surfaces of all kinds, such as Trays, jewellery boxes, glass, cartons. Quality you can rely on Of course, all Venilia films are phthalate-free. Thanks to the special thickness of 160µ, the film is easy to apply. Even if you need several attempts until the film is positioned correctly, the corners do not warp and the film retains its shape. Large and small surfaces are covered in no time and finger insert. High-quality self-adhesive furniture film in wood look. Perfect Fix micro-perforation guarantees bubble-free application. Wipe clean thanks to high water and heat resistance indoors. Exceptional thickness of 160µ. Phthalate-free. Ideal for transforming large areas such as kitchens, cupboards etc. Aids In order for the project to be successful, it is advisable to have the following tools at hand: Underlay For cutting a pair of scissors or Stanley knife/cutter: the blade of the scissors or the cutter should be sharp, so that the edges are particularly beautiful and accurate. Ruler. For smoothing a squeegee (also available from Venilia as an accessory set!) Preparation For a good result, it is helpful when surfaces are clean, dry and free from grease. Cleaning with simple rinse and water is usually sufficient. Dry well and you’re ready to go! Of course, rough surfaces can also be glued – plaster, cement and plywood should be applied beforehand with a varnish or coat. Next, measure the surface to be glued and cut the film to fit. For an area with cut-outs, a template can be created from newspaper or cardboard. This is placed on the back of the film and transferred as an exact shape and cut. There is a printed grid on the back of the adhesive sheet to help measure and cut. Application of the film. For best results, it is recommended to work at room temperature. Remove the protective film, carefully position the edge and smooth the film piece by piece. A squeegee is helpful to avoid air bubbles. The good thing is that the fixing time is approx. 20 minutes: this means that the film can still be re-applied within the first 20 minutes until the correct position is found. After that, it will last. Large surfaces: it is easier not to peel off the whole protective film. Cut by piece. If the first part of the adhesive film is bubble-free, peel off a piece more from the protective film and apply the adhesive film. Repeat until the whole film sticks nicely smooth.