From the manufacturer Ensure surfaces are clean, dry and free from dust, grease and other contaminants before. Put base on a flat surface and apply bead of approximately 3mm diameter on the 2 large panels, placing it about 3mm from the edge. Place back panel and press down to reduce joint thickness to 1-2mm. Apply beads of sealant to edge of small panel and corresponding large panel. Push edges of large and small panel together and hold in place. Repeat for second small panel, fitting the front panel on last. Apply structural joint of required thickness to all internal faces and finish with dowel to push home sealant. Allow to cure fully for 24 hours before moving. Once dried rinse out thoroughly before use.
About this item Specifically formulated for aquarium manufacturing due to its permanently flexible transparent seal that forms a water tight seal Also ideal for sealing pond liners and supply or drainage piping. Free from fungicide and solvent – will not harm fish Fast curing to give quick early strength Able to withstand constant immersion Meets ISO 11600 G25 HM performance standards. Apply using a caulk, sealant / adhesive cartridge application gun, we recommend the Everbuild Power Pro Heavy Duty Sealant / Adhesive Cartridge Applicator Gun › From the manufacturer Ensure surfaces are clean, dry and free from dust, grease and other contaminants before. Put base on a flat surface and apply bead of approximately 3mm diameter on the 2 large panels, placing it about 3mm from the edge. Place back panel and press down to reduce joint thickness to 1-2mm. Apply beads of sealant to edge of small panel and corresponding large panel. Push edges of large and small panel together and hold in place. Repeat for second small panel, fitting the front panel on last. Apply structural joint of required thickness to all internal faces and finish with dowel to push home sealant. Allow to cure fully for 24 hours before moving. Once dried rinse out thoroughly before use.